Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Axial Flow Fan factory
#1
XH-AF-GD30K3 Pipe axial flow fan
Product Introduction
XH-AF-GD30K3 axial flow fan is modified and designed on the basis of FBZ-11 axial flow fan. It can replace CZL-11 long axis fan. Delivery of motor of harmful gas, it can be as part of the pipeline, coupling among the pipeline to use, suitable for chemical industry system, paper industry and other industrial conveying the harmful gas of various medium under 60℃.
Product Parameter
№Rotate Speed
(r/min)Operating ModeTotal Pressure
(pa)Air Quantity
(m3/h)Power (kw)
614501
2
3
4167
167
177
1877200
9500
11300
131501.1
2.2
9601
2
3
474
74
78
814800
6300
7550
87000.75
714501
2
3
4226
226
235
24511500
14100
18000
209002.2
4
9601
2
3
493
93
98
1037650
10000
12000
199001.1
814501
2
3
4294
294
314
32417300
22000
27000
313005.5
7.5
9601
2
3
4128
128
137
14511400
14900
17800
206001.5
2.2
99601
2
3
4157
157
177
18316200
21200
23200
293002.2
4
101
2
3
4206
206
226
23522600
29700
35400
410004
7.5
№Rotate Speed
(r/min)Operating ModeTotal Pressure
(pa)Air Quantity
(m3/h)Power (kw)
614501
2
3
4186
206
216
2357800
9700
12000
140001.1
2.2
9601
2
3
478
88
98
1045170
6430
7940
92700.75
714501
2
3
4255
284
304
31412500
15000
19000
225002.2
4
9601
2
3
4103
118
128
1378270
9930
12600
149001.1
814501
2
3
4334
373
392
41218100
22650
27900
332005.5
7.5
9601
2
3
4147
157
167
17712000
15000
18500
220001.5
2.2
99601
2
3
4186
206
216
23517500
21500
26800
320002.2
4
101
2
3
4226
255
275
28424000
30000
36000
430004
7.5
Product feature and application
XH-AF-GD30K3 Axial flow fan according to the impeller diameter can be divided into: № 6, 7, 8, 9, 10, five number, leaf numbers according to the requirement of the performance are four and six pieces; Installation angles: 15 degrees, 20 degrees, 25 degrees, 30 degrees.
The biggest characteristic of this fan is
The motor is mounted on the upper part of the ventilator, which is driven by triangular belt. The motor is supported by adjustable motor base plate, and the center distance can be adjusted appropriately. The transmission group is fixed in the sealing cylinder at the center of the air duct and is isolated from the media. Therefore, the fan can transport moisture and other harmful gas to the motor. The fan can change the air volume and pressure by changing the revolution.
The fan is made of ordinary steel welded, and whether to transport gas corrosive, combustible and so on or not can be clearly put forward when ordering.
Installation and maintenance
1.Before installation, check whether the parts are damaged or deformed, whether the parts are complete and normal before installation.
2.Before installation, check in detail whether the connection part is loose, whether the clearance between impeller and air duct is appropriate, whether the rotating part is flexible, and whether the fixed part is worn. Check whether there are foreign bodies in the air duct, and remove them if there are.
3.Before installation, the bearing should be carefully checked for good lubrication. If the bearing is sealed for a long time, it should be replaced with new grease.
4.When installing, the machine base should be naturally consistent with the ground, and should not be forcibly connected, to avoid deformation of the machine base.
5.After installation, carefully check whether the anchor bolts are tightened, and to run the test.
6.Bearing operating temperature does not exceed 65 ℃. When at work, if you have any special or excessive vibration and noise, stop it for checking.
7.The equipment shall be maintained by people, and the inspection and repair period shall be determined according to the working conditions. The bearing grease shall be replaced frequently, and foreign matters shall not be mixed in when changing the oil.Axial Flow Fan factory
website:http://www.xinhuablower.com/axial-flow-fan/
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)